Expansion cards and backup units
Figure 105: Removing the TFM
Ê Remove the three screws (1).
Ê Remove the TFM (2).
9.4.5.3
Installing the new TFM
Ê Install the new TFM as described in section
on page
191.
Ê Connect the FBU adapter cable to the TFM as described in section
"Connecting the FBU adapter cable to the TFM" on page
Ê Install the expansion card as described in section
cards" on page
9.4.5.4
Concluding steps
"Installing the fan module" on page 152
Ê
"Reassembling" on page 58
Ê
Ê Reconnect all external cables to the replaced expansion card.
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 68
Ê
188
175.
Upgrade and Maintenance Manual
"Installing the FBU in the holder"
196.
"Installing expansion
TX1330 M1