Installing The New Tfm; Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 164: Removing the TFM
Ê Remove the three screws (1).
Ê Remove the TFM (2).
9.4.4.3

Installing the new TFM

Ê Install the new TFM as described in section
controller (if applicable)" on page
Ê Connect the FBU cable to the TFM.
Ê Install the expansion card as described in section
card" on page
9.4.4.4

Concluding steps

"Reassembling" on page 62
Ê
Ê Reconnect all external cables to the replaced expansion card.
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
242
232.
Upgrade and Maintenance Manual
"Installing TFM to the RAID
249.
"Installing an expansion
TX2540 M1