Installing The New Tfm; Concluding Steps - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Figure 84: Removing the TFM
Ê Remove the three screws (1).
Ê Remove the TFM (2).
9.2.4.3

Installing the new TFM

Ê Install the new TFM as described in section
controller (if applicable)" on page
Ê Connect the FBU adapter cable to the TFM as described in section
"Connecting the FBU adapter cable to the TFM" on page
Ê Install the expansion card as described in section
cards" on page
9.2.4.4

Concluding steps

Perform the following procedures to complete the task:
Ê Close the server cover as described in section
page 64.
Ê If applicable, connect external cables to the expansion card.
Ê Reconnect the AC power cord to the power supply unit.
TX1320 M1
174.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing TFM to the RAID
187.
"Installing expansion
"Closing the server" on
190.
185