Removing The Tfm; Installing The New Tfm - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4.5.2

Removing the TFM

Figure 235: Disconnecting the FBU adapter cable from the TFM
Ê Disconnect the FBU adapter cable from the TFM.
Figure 236: Removing the TFM
Ê Remove the two screws (1).
Ê Remove the TFM (2).
I
Note for replacing the TFM:
The two spacer bolts can remain on the RAID controller.
9.4.5.3

Installing the new TFM

Ê Install the TFM onto the existing TFM spacer bolts as described in section
"Installing a TFM" on page
330
320.
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2