Installing A 3.5-Inch Hdd Module - Fujitsu PRIMERGY TX2550 M5 Operating Manual

6.3.1.2

Installing a 3.5-inch HDD module

Figure 21: Opening the 3.5-inch HDD module locking lever
Ê Pinch the green locking clip (1) and open the locking lever (2).
Figure 22: Installing the 3.5-inch HDD module
Ê Install the HDD module into a drive bay and carefully push back as far as it
will go (1).
Ê Close the locking lever to lock the HDD module in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
I
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see section
overview" on page
TX2550 M5
13.
Operating Manual
Operation
"Documentation
83