Installing Hdd/Ssd Modules; Installing 3.5-Inch Hdd Modules; Removing A 3.5-Inch Hdd Dummy Module; Installing A 3.5-Inch Hdd Module - Fujitsu PRIMERGY RX2520 M5 Operating Manual

Operation
6.2 Installi
6.2.1

Installing 3.5-inch HDD modules

6.2.1.1

Removing a 3.5-inch HDD dummy module

Figure 21: Removing a 3.5-inch dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Keep the dummy module for future use.
Always replace dummy modules into unused HDD bays to comply with
applicable EMC regulations and satisfy cooling requirements.
6.2.1.2

Installing a 3.5-inch HDD module

Figure 22: Opening the 3.5-inch HDD module locking lever
Ê Pinch the green locking clip (1) and open the locking lever (2).
74
ng HDD/SSD modules
Operating Manual
RX2520 M5