Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet oam discovery
To display discovery information for all Ethernet operations, maintenance, and administration (OAM)
interfaces or for a specific interface, use the show ethernet oam discovery command in privileged
EXEC mode.
Syntax Description
interface
type
number
Command Modes
Privileged EXEC (#)
Command History
Release
12.2(33)SRA
12.4(15)T
12.2(33)SXH
12.2(33)MRA
15.0(1)MR
Usage Guidelines
This command displays the following information pertaining to Ethernet OAM discovery:
•
•
•
•
•
If an interface is specified, only data pertaining to the OAM peer on that interface is displayed;
otherwise, data for all OAM peers (on all interfaces) is displayed.
Examples
The following example shows output from a show ethernet oam discovery command for interface
GigabitEthernet 6/11:
Router# show ethernet oam discovery interface gigabitethernet6/11
GigabitEthernet6/11
Local client
------------
Administrative configurations:
OL-23890-01
show ethernet oam discovery [interface type number]
(Optional) Specifies an interface.
(Optional) Type of Ethernet interface. Valid values are: FastEthernet,
GigabitEthernet.
(Optional) Integer from 1 to 9 that is the number of the Ethernet interface.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Remote device which is directly connected to this device
Local and remote OAM configuration and capability
Local and remote OAM mode
Remote platform identity
State of the local discovery state machine
Mode:
active
Unidirection:
not supported
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet oam discovery
521
Advertisement
Table of Contents
