Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Command History
Release
12.2(33)SRA
12.4(11)T
12.2(33)SXH
12.2(33)SRD
12.2(33)SXI2
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use this command to obtain information about a specific maintenance point by specifying its MPID or
to obtain information about all maintenance points that have a particular MAC address.
When a maintenance domain is not specified, all matching maintenance points, independent of their
levels (CFM D1 only), are displayed; otherwise, only maintenance points at the specified maintenance
domain are shown.
In CFM D1 only, when an EVC is specified, only maintenance points that are members of the EVC are
displayed.
When a VLAN is specified, only maintenance points on that VLAN are displayed.
Examples
The following is sample output from a show ethernet cfm maintenance-points remote detail
command using the mpid option:
Router# show ethernet cfm maintenance-points remote detail mpid 401
Version: IEEE-CFM
MAC Address: aabb.cc03.bb99
Domain Name: Domain_L5
MA Name: cust_500_l5
Level: 5
VLAN: 9
MPID: 401
Sender Chassis ID: Router3-cfm
Incoming Port(s): Ethernet0/0.9
CC Lifetime(sec): 35
Age of Last CC Message(sec): 10
CC Packet Statistics: 91/0 (Received/Error)
MEP interface status: Up
MEP port status: Up
Receive RDI: FALSE
Router#
OL-23890-01
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(11)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
Output was modified in Cisco IOS Release 12.2(33)SRD to show detailed
information about Receive RDI and EVC. The evc keyword and evc-name
argument were also introduced.
This command was integrated into Cisco IOS Release 12.2(33)SXI2.
This command was integrated into Cisco IOS Release 12.2(33)MRA. This
release does not support the evc parameter.
The command output was modified to display when CFM has suspended
monitoring of Continuity Check messages from a remote MEP. The
command output indicates the suspended status and suspended time
remaining in the CC Lifetime value.
This release does not support CFM Draft 1.0 syntax, which includes the level
and service keywords.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm maintenance-points remote detail
505
Advertisement
Table of Contents
