Switch L2Trust - Cisco MWR 2941 Command Reference Manual

switch l2trust

switch l2trust
Enables layer 2 trust mode on the Cisco MWR 2941 gigabitEthernet ports. To disable layer 2 trust mode,
use the no form of this command.
Command Default
This command is disabled by default.
Command Modes
Global configuration
Command History Release
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
This command enables layer 2 trusted mode for all gigabitEthernet ports on the 12.2(33)MRA.
Examples
The following example shows the output generated by this command:
Router(config)# switch l2trust
Router(config)# exit
Related Commands Command
show interface switchport
backup
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
650
switch l2trust
no switch l2trust
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Displays status information about the backup switchport.
OL-23890-01