Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
•
•
•
The display may also be restricted to either MEPs or MIPs.
If a domain name has more than 43 characters, a warning message is displayed notifying that the
maintenance domain ID (MDID) will be truncated to 43 characters in continuity check messages
(CCMs) if "id <fmt> <MDID>" is not configured.
Examples
Following is sample output from a show ethernet cfm maintenance-points local detail
command when none of the other optional keywords and arguments are specified:
Router# show ethernet cfm maintenance-points local detail
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name
--------------------------------------------------------------------------------
301
401
Total Local MEPs: 2
Local MIPs: None
Table 20
Table 20
Field
MPID
Domain Name
Lvl
MacAddress
Type
CC
Domain Id
Dir
Port
Id
MA Name
OL-23890-01
On a particular interface independent of domain
On a particular interface belonging to a given domain
Belonging to a given domain independent of interface
Domain Id
MA Name
EVC name
Domain_L7
Domain_L7
cust_700_l7
N/A
Domain_L5
Domain_L5
cust_500_l5
N/A
describes the significant fields shown in the display.
show ethernet cfm maintenance-points local Field Descriptions
Lvl
Dir
7
Up
5
Up
Description
Identifier of the maintenance point.
Name of the domain.
Maintenance level where the maintenance point is
configured.
MAC address of the maintenance point.
Type of MEP (VLAN or port MEP)
Continuity check operational status.
Identifier of the domain.
Direction which the maintenance point is facing.
Port MEP.
Identifier of the VLAN.
Name of the maintenance association.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm maintenance-points local
MacAddress
Type
CC
Port
Id
SrvcInst
aabb.cc03.bb99 Vlan
Y
Et0/1
11
N/A
aabb.cc03.bb99 Vlan
Y
Et0/1
9
N/A
497
Advertisement
Table of Contents
