Router Bgp - Cisco MWR 2941 Command Reference Manual

router bgp

router bgp
To configure the BGP routing process, use the router bgp command in global configuration mode. To
remove a routing process, use the no form of this command.
Syntax Description
autonomous-system-number
Command Default No BGP routing process is configured by default.
Command Modes
Global configuration (config)
Command History Release
10.0
12.2(25)SG
12.2(33)SRA
12.2(31)SB2
12.2(33)SRB
12.2(14)SX
12.2(33)SB
12.0(32)S12
12.0(32)SY8
12.4(24)T
Cisco IOS XE
Release 2.3
12.2(33)SXI1
12.0(33)S3
Cisco IOS XE
Release 2.4
12.4(20)MR
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
380
router bgp autonomous-system-number
no router bgp autonomous-system-number
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(25)SG.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.2(31)SB2.
This command was modified. Support for IPv6 was added.
This command was integrated into Cisco IOS Release 12.2(14)SX.
This command was modified. Support for IPv6 was added.
This command was modified. Support for 4-byte autonomous system
numbers in asdot notation only was added.
This command was modified. Support for 4-byte autonomous system
numbers in asplain and asdot notation was added.
This command was modified. Support for 4-byte autonomous system
numbers in asdot notation only was added.
This command was modified. Support for 4-byte autonomous system
numbers in asdot notation only was added.
This command was modified. Support for 4-byte autonomous system
numbers in asplain and asdot notation was added.
This command was modified. Support for asplain notation was added and the
default format for 4-byte autonomous system numbers is now asplain.
This command was modified. Support for asplain notation was added and the
default format for 4-byte autonomous system numbers is now asplain.
This command was integrated into Cisco IOS Release 12.4(20)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Number of an autonomous system that identifies the router to other
BGP routers and tags the routing information that is passed along.
Number in the range from 1 to 65535.
For more details about autonomous system number formats, see the
"Usage Guidelines" section.
OL-23890-01