Show Connection - Cisco MWR 2941 Command Reference Manual

show connection

show connection
To display the status of interworking connections, use the show connection command in privileged
EXEC mode.
Syntax Description all
element
id ID
name name
port port
Command Modes Privileged EXEC
Command History Release
12.1(2)T
12.0(27)S
12.2(25)S
12.4(2)T
12.0(30)S
12.2(28)SB
12.4(8)
12.2(33)SRA
12.4(11)T
12.2SX
12.4(19)MR2
12.2(33)MRA
15.0(1)MR
Examples The following example shows the local interworking connections on a router:
Router# show connection
ID
========================================================================
1
2
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
464
show connection [all | element | id ID | name name | port port]
(Optional) Displays information about all interworking connections.
(Optional) Displays information about the specified connection element.
(Optional) Displays information about the specified connection identifier.
(Optional) Displays information about the specified connection name.
(Optional) Displays information about all connections on an interface. (In
Cisco IOS Release 12.0S, only ATM, serial, and Fast Ethernet connections
are shown.)
Modification
This command was introduced as show connect (FR-ATM).
This command was integrated into Cisco IOS Release 12.0(27)S and updated
to show all ATM, serial, and Fast Ethernet interworking connections.
This command was integrated into Cisco IOS Release 12.2(25)S.
The command output was changed to add Segment 1 and Segment 2 fields
for Segment state and channel ID.
This command was integrated into Cisco IOS Release 12.0(30)S.
This command was integrated into Cisco IOS Release 12.2(28)SB.
This command was integrated into Cisco IOS Release 12.4(8).
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.4(11)T.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
This command was integrated into Cisco IOS Release 12.4(19)MR2.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Name Segment 1
conn1 ATM 1/0/0 AAL5 0/100
conn2 ATM 2/0/0 AAL5 0/300
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Segment 2 State
ATM 2/0/0 AAL5 0/100
Serial0/1 16
UP
UP
OL-23890-01