Police (Two Rates) - Cisco MWR 2941 Command Reference Manual

police (two rates)

police (two rates)
To configure traffic policing using two rates, the committed information rate (CIR) and the peak
information rate (PIR), use the police command in policy-map class configuration mode. To remove
two-rate traffic policing from the configuration, use the no form of this command.
Syntax Description
cir
cir
bc
conform-burst
pir
pir
be
peak-burst
conform-action
exceed-action
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
306
police cir cir [bc conform-burst] [pir pir] [be peak-burst] [conform-action action [exceed-action
action [violate-action action]]]
no police cir
Committed information rate (CIR) at which the first token bucket is updated.
Specifies the CIR value in bits per second. The value is a number from 8000
to 200000000.
(Optional) Conform burst (bc) size used by the first token bucket for
policing.
(Optional) Specifies the bc value in bytes. The value is a number from 1000
to 51200000.
(Optional) Peak information rate (PIR) at which the second token bucket is
updated.
(Optional) Specifies the PIR value in bits per second. The value is a number
from 8000 to 200000000.
(Optional) Peak burst (be) size used by the second token bucket for policing.
(Optional) Specifies the peak burst (be) size in bytes. The size varies
according to the interface and platform in use.
(Optional) Action to take on packets that conform to the CIR and PIR.
(Optional) Action to take on packets that conform to the PIR but not the CIR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01