Show Cns Event Subject - Cisco MWR 2941 Command Reference Manual

show cns event subject

show cns event subject
To display a list of subjects about the Cisco Networking Services (CNS) event agent connection, use the
show cns event subject command in privileged EXEC mode.
Syntax Description name
Command Modes Privileged EXEC (#)
Command History Release
12.2(2)T
12.0(18)ST
12.0(22)S
12.2(8)T
12.2(25)S
12.2(33)SRA
12.2(33)SB
12.2(33)SXI
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines Use the show cns event subject command to display a list of subjects of the event agent that are
subscribed to by applications.
Examples
The following example displays the IP address and port number of the primary and backup gateways:
Router# show cns event subject
The list of subjects subscribed by applications.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
476
show cns event subject [name]
(Optional) Displays a list of applications that are subscribing to this specific
subject name.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.0(18)ST.
This command was integrated into Cisco IOS Release 12.0(22)S.
This command was implemented on the Cisco 2600 series and the
Cisco 3600 series.
This command was integrated into Cisco IOS Release 12.2(25)S.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.2(33)SB.
This command was integrated into Cisco IOS Release 12.2(33)SXI.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
cisco.cns.mibaccess:request
cisco.cns.config.load
cisco.cns.config.reboot
cisco.cns.exec.cmd
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01