shdsl annex
shdsl annex
To define the single-pair high-bit-rate digital subscriber line (SHDSL) G.991.2 standard, use the shdsl
annex command in config controller DSL group mode.
Syntax Description
standard
Command Default
SHDSL annex B
Command Modes
Config controller DSL group
Command History
Release
12.4(15)T
12.4(20)MR
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
450
shdsl annex {standard}
Defines the standard for the selected type of DSL group.
IMA Group
•
•
•
M-PAIR Group
•
•
•
•
•
•
1-PAIR and 2-PAIR Group
•
•
•
•
•
•
Modification
This command was introduced for the Cisco HWIC-4SHDSL and
HWIC-2SHDSL running on the Cisco 1841 router and on the Cisco 2800 and
3800 series access routers.
This command was integrated into Cisco IOS Release 12.4(20)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
A
A-B
B
A
A-B
B
F {coding {16 | 32}}
F-G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
A
A-B
B
F {coding 16 | 32}
F-G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
OL-23890-01