Cisco MWR 2941 Command Reference Manual page 370

ptp slave
Router(config)# exit
Related Commands Command
ptp clock-source
ptp enable
ptp mode
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
352
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Specifies the IP address of the clock source. This command only
applies when the router is in PTP slave mode.
Enables PTP mode on an interface.
Specifies the PTP mode.
OL-23890-01