Cisco MWR 2941 Command Reference Manual page 99

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Note The udi keyword will create an ID consisting of the PID, VID, and SN values. Any spaces in PID, VID
and SN values will be removed. To view the UDI for this product, use the show inventory command.
This keyword is not available in Cisco IOS Release 12.2(33)SRA.
Examples
The following example shows how to pass the hostname of the Cisco IOS device as the config ID value:
Router(config)# cns id hostname
The following example shows how to pass the hardware serial number of the Cisco IOS device as the
event ID value:
Router(config)# cns id hardware-serial event
The following example shows how to pass the UDI as the event ID value:
Router(config)# cns id udi event
The following example shows how to pass the IP address of Ethernet interface 0/1 as the image ID value:
Router(config)# cns id ethernet 0/1 image
Related Commands Command
cns event
cns image
show inventory
OL-23890-01
Description
Enables the CNS event gateway, which provides CNS event services to
Cisco IOS clients.
Enables the CNS image agent services to Cisco IOS clients.
Displays the product inventory listing for all Cisco products that are installed
in a networking device.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns id
81