Cisco MWR 2941 Command Reference Manual page 566

show l2protocol-tunnel
Drop Threshold for Encapsulated Packets: 3000
Port
------- -------- --------- --------- ------------- ------------- -------------
Fa3/38
Router#
This example shows how to display a summary of Layer 2-protocol tunnel ports:
Router# show l2protocol-tunnel summary
COS for Encapsulated Packets:5
Drop Threshold for Encapsulated Packets:0
Port
------- ----------- ---------------- ---------------- ----------
Fa9/1
Fa9/9
Fa9/47
Fa9/48
Router>
This example shows how to display Layer 2-protocol tunnel information on interfaces for a specific
VLAN:
Router# show l2protocol-tunnel vlan 1
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Protocol Drop Counter
-------- -------------
cdp
lldp
stp
vtp
Port
------------------- -------- --------- --------- --------- --------- ---------
Router#
Related Commands Command
l2protocol-tunnel
l2protocol-tunnel
drop-threshold
l2protocol-tunnel
shutdown-threshold
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
548
Protocol Shutdown Drop
Threshold Threshold
cdp ---- 3000
stp ---- 3000
--- ----
Protocol Shutdown
Threshold
(cdp/stp/vtp)
--- stp --- ----/----/----
cdp stp vtp ----/----/----
--- --- --- ----/----/----
cdp stp vtp ----/----/----
0
0
0
0
Protocol Thresholds
Shutdown
Description
Enables the protocol tunneling on an interface and specifies the type of
protocol to be tunneled.
Specifies the maximum number of packets that can be processed for the
specified protocol on that interface before being dropped.
Specifies the maximum number of packets that can be processed for the
specified protocol on that interface in one second.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Encapsulation Decapsulation
Counter Counter
5 0
2653 0
---- ----
Drop Status
Threshold
(cdp/stp/vtp)
----/----/---- down
----/----/---- up
1500/1500/1500 down(trunk)
----/----/---- down(trunk)
Counters
Drop Encap Decap
Drop
Counter
0
0
----
Drop
OL-23890-01