Cisco MWR 2941 Command Reference Manual page 223

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Refer to the "Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling" chapter of the
Cisco 7600 Series Router Cisco IOS Software Configuration Guide for additional information on setting
the drop threshold value.
Examples
This example shows how to specify the maximum number of CDP packets that can be processed on that
interface in 1 second:
Router(config-if)# switchport
Router(config-if)# l2protocol-tunnel shutdown-threshold cdp 200
Router(config-if)#
Related Commands Command
l2protocol-tunnel
show
l2protocol-tunnel
switchport
OL-23890-01
Description
Enables the protocol tunneling on an interface and specifies the type of
protocol to be tunneled.
Displays the protocols that are tunneled on an interface or on all interfaces.
Modifies the switching characteristics of the Layer 2-switched interface.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
l2protocol-tunnel shutdown-threshold
205