Show Ethernet Cfm Maintenance-Points Remote - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

show ethernet cfm maintenance-points remote

To display detailed information about remote maintenance endpoints (MEPs) configured statically in the
MEP list and their status in the continuity check database (CCDB), use the show ethernet cfm
maintenance-points remote command in privileged EXEC mode.
CFM IEEE 802.1ag Standard (CFM IEEE)
Syntax Description
domain
domain-name
crosscheck
static
mpid
mpid
port
vlan
vlan-id
Command Default
No default settings or behaviors.
Command Modes Privileged EXEC (#)
Command History Release
12.2(33)SRA
12.4(11)T
12.2(33)SRB
12.2(33)SXH
12.2(33)SXI2
12.2(33)MRA
15.0(1)MR
OL-23890-01
show ethernet cfm maintenance-points remote [domain domain-name | [[crosscheck | static]
[domain domain-name | mpid mpid [domain domain-name]] [port | vlan vlan-id]]]
(Optional) Indicates that a maintenance domain is specified.
(Optional) String of a maximum of 154 characters.
(Optional) Shows the Mep-Up status from the D1 crosscheck function.
(Optional) Shows the Mep-Up status from the continuity-check static rmep
function.
(Optional) Shows a remote maintenance point.
(Optional) Integer from 0 to 8191 that identifies the maintenance point.
(Optional) Shows the operational state of the port MEP.
(Optional) Shows a VLAN configuration.
(Optional) Integer from 1 to 4094 that identifies the VLAN.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(11)T.
The output of this command was enhanced to include the port state values of
REMOTE_EE, LOCAL_EE, and TEST.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was integrated into Cisco IOS Release 12.2(33)SXI2.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
The command output was modified to display when CFM has suspended
monitoring of Continuity Check messages from a remote MEP. The
command output displays Suspend as the as the MPID operational state
(IfSt).
This release does not support the level keyword used to configure CFM Draft
1.0.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm maintenance-points remote
499