Show Tech-Support Control-Ethernet - Cisco XR 12000 Reference

show tech-support control-ethernet

show tech-support control-ethernet
To automatically run show commands that display information specific to control Ethernet debugging, use
the show tech-support control-ethernet command in Administration EXEC mode.
show tech-support control-ethernet [fast] [location node-id] {terminal [page]| file send-to [background]
[compressed| uncompressed]}
Syntax Description
fast
location
node-id
terminal
page
file
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
186
(Optional) Collects the output simultaneously from multiple line cards ina
multi-chassis router.
(Optional) Specifies a node.
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Tech-Support Commands
OL-30353-01