Table of Contents
Advertisement
show ptp port
show ptp port
To display the PTP port properties, use the show ptp port command in user EXEC mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
User EXEC
Command History
Release
12.4(12)MR2
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use the show ptp port command to o display the PTP port properties.
Examples
The following example shows output from the show ptp port command:
Router# show ptp port
PTP PORT DATASET: Vlan1
Port identity: clock identity: 0x0:1E:4A:FF:FF:96:A9:9E
Port identity: port number: 1
PTP version: 2
Delay request interval(log mean): 0
Announce receipt time out: 0
Peer mean path delay: 0
Announce interval(log mean): 0
Sync interval(log mean): 0
Delay Mechanism: End to End
Peer delay request interval(log mean): 0
Sync fault limit: 6000
Related Commands
Command
show ptp clock
show ptp
foreign-master-record
show ptp parent
show ptp time-property
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
598
show ptp port
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Displays information about the PTP clock.
Displays the PTP foreign master records.
Displays the PTP parent properties.
Displays the time properties of the PTP clock.
OL-23890-01
Advertisement
Table of Contents
