Show Atm Cell-Packing - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

show atm cell-packing

To display cell packing information for the Layer 2 attachment circuits (ACs) configured on your
system, use the show atm cell-packing command in privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.4(19)MR2
12.2(33)MRA
15.0(1)MR
Examples The following example shows output from the show atm cell-packing command:
Router# show atm cell-packing
ATM0/2/0/1.200
ATM0/2/0/1.300
Related Commands Command
cell-packing
atm cell-packing
OL-23890-01
show atm cell-packing
Modification
This command was integrated into Cisco IOS Release 12.4(19)MR2.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Circuit
Type
vc 1/200
vc 1/300
avg #
local cells/pkt negotiated
MNCP rcvd MNCP
1 0
1 0
Description
Packs multiple ATM cells into each MPLS or L2TPv3 packet.
Packs multiple ATM cells into each MPLS or L2TPv3 packet.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show atm cell-packing
avg #
cells/pkt MCPT
sent (us)
1 0
1 0
50
50
459