Cisco MWR 2941 Command Reference Manual page 574

show mpls l2transport vc
Release
12.2(17d)SXB
12.2(25)S
12.2(28)SB
12.2(33)SRA
12.2(33)SRB
12.2(33)SXH
12.2(33)SRC
12.4(19)MR2
12.2(33)MRA
15.0(1)MR
Usage Guidelines If you do not specify any keywords or arguments, the command displays a summary of all the VCs.
Examples The output of the commands varies, depending on the type of Layer 2 packets being transported over the
AToM VCs.
The following example shows information about the interfaces and VCs that have been configured to
transport various Layer 2 packets on the router:
Router# show mpls l2transport vc
Local intf
-------------
AT4/0
AT4/0
AT4/0.300
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
556
Modification
Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
This command was updated with new output and fields for nonstop forwarding
(NSF), stateful switchover (SSO), and graceful restart (GR) abilities.
This command was implemented on the Cisco 10000 series routers. Example
output was changed for the Cisco 10000 series router, and two fields (SSO
Descriptor and SSM segment/switch IDs) were removed from the output, because
they are not supported.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was updated to include forwarding equivalence class (FEC) 129
signaling information for pseudowires that are configured through VPLS
Autodiscovery, and to support provisioning Any Transport over MPLS (AToM)
static pseudowires.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was updated to display the number of MAC address withdrawal
messages sent and received as part of the H-VPLS N-PE Redundancy for QinQ
and MPLS Access feature.
This command was updated to display pseudowire status between peer routers that
have been configured for the MPLS Pseudowire Status Signaling feature.
This command was integrated into Cisco IOS Release 12.4(19)MR2.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Local circuit Dest address
------------------ --------------- ---------- ----------
ATM AAL5 0/100 10.0.0.1
ATM AAL5 0/200 10.0.0.1
ATM AAL5 0/300 10.0.0.1
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
VC ID Status
100 UP
200 UP
300 UP
OL-23890-01