Show Cns Event Connections - Cisco MWR 2941 Command Reference Manual

show cns event connections

show cns event connections
To display the status of the Cisco Networking Services (CNS) event agent connection, use the show cns
event connections command in privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History Release
12.2(8)T
12.2(25)S
12.2(33)SRA
12.2(33)SB
12.2(33)SXI
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use the show cns event connections command to display the status of the event agent connection—such
as whether it is connecting to the gateway, connected, or active—and to display the gateway used by the
event agent and its IP address and port number.
Examples
The following example displays the IP address and port number of the primary and backup gateways:
Router# show cns event connections
The currently configured primary event gateway:
Event-Id is Internal test1
Keepalive setting:
Connection status:
The currently configured backup event gateway:
The currently connected event gateway:
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
472
show cns event connections
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(25)S.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.2(33)SB.
This command was integrated into Cisco IOS Release 12.2(33)SXI.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
hostname is 10.1.1.1.
port number is 11011.
none.
Connection Established.
none.
hostname is 10.1.1.1.
port number is 11011.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01