Ethernet Oam Mib Log Size - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

ethernet oam mib log size

To set the size of the Ethernet Operations, Administration, and Maintenance (OAM) event log table, use
the ethernet oam mib log size command in global configuration mode. To remove the event log table,
use the no form of this command.
Syntax Description entries
Command Default An event log table is not configured.
Command Modes Global configuration (config)
Command History Release
12.2(33)SRD
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Use this command to configure an OAM event log table.
Examples
The following example shows how to set the size of an event log table to 100 entries:
Router# configure terminal
Router(config)# ethernet oam mib log size 100
OL-23890-01
ethernet oam mib log size entries
no ethernet oam mib log size
Number of entries that the event log table will hold. Integer from 0 to 200.
The minimum is 0, the maximum is 200, and the default is 50.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ethernet oam mib log size
159