Cisco MWR 2941 Command Reference Manual page 61

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Command
match access-group
match input-interface Configures a class map to use the specified input interface as a match
match ip dscp
match mpls
experimental
match protocol
policy-map
service-policy
show class-map
show policy-map
interface
OL-23890-01
Description
Configures the match criteria for a class map on the basis of the specified
ACL.
criterion.
Identifies one or more DSCP, AF, and CS values as a match criterion
Configures a class map to use the specified EXP field value as a match
criterion.
Configures the match criteria for a class map on the basis of the specified
protocol.
Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
Attaches a policy map to an input interface or virtual circuit (VC) or to an
output interface or VC to be used as the service policy for that interface or
VC.
Displays class-map information.
Displays the statistics and the configurations of the input and output policies
that are attached to an interface.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
class-map
43