Match Qos-Group - Cisco MWR 2941 Command Reference Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR

match qos-group

To identify a specific quality of service (QoS) group value as a match criterion, use the match
qos-group command in class-map configuration mode. To remove a specific QoS group value from a
class map, use the no form of this command.
Syntax Description qos-group-value
Command Default
No match criterion is specified.
Command Modes
Class-map configuration (config-cmap)
Command History Release
11.1CC
12.05(XE)
12.2(13)T
12.2(33)SRA
12.2(31)SB
12.2SX
Cisco IOS XE
Release 2.1
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines The match qos-group command is used by the class map to identify a specific QoS group value marking
on a packet. This command can also be used to convey the received Multiprotocol Label Switching
(MPLS) experimental (EXP) field value to the output interface.
The qos-group-value argument is used as a marking only. The QoS group values have no mathematical
significance. For instance, the qos-group-value of 2 is not greater than 1. The value simply indicates that
a packet marked with the qos-group-value of 2 is different than a packet marked with the
qos-group-value of 1. The treatment of these packets is defined by the user through the setting of QoS
policies in QoS policy-map class configuration mode.
OL-23890-01
match qos-group qos-group-value
no match qos-group qos-group-value
The exact value from 0 to 99 used to identify a QoS group value.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.0(5)XE.
This command was integrated into Cisco IOS Release 12.2(13)T.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.2(31)SB and
implemented on the Cisco 10000 series.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
This command was implemented on Cisco ASR 1000 series routers.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
match qos-group
231