Cisco MWR 2941 Command Reference Manual page 39

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Router(config)# interface atm1/0
Router(config-if)# xconnect 10.0.0.1 100 pw-class mpls
Router(config-if-xconn)# backup peer 10.0.0.2 200
Router(config-if-xconn)# exit
Router(config-if)# exit
Router(config)# exit
The following example shows a backup peer configuration for an ATM interface:
Router# config t
Router(config)# pseudowire-class mpls
Router(config-pw-class)# encapsulation mpls
Router(config-pw-class)# exit
Router(config)# interface atm0/1
Router(config-if)# xconnect 10.0.0.2 1 pw-class mpls
Router(config-if-xconn)# backup peer 10.0.0.2 100 pw-class mpls
Router(config-if-xconn)# exit
Router(config-if)# exit
Router(config)# exit
Related Commands Command
backup delay
OL-23890-01
Description
Specifies how long the backup PW VC should wait before resuming
operation after the primary PW VC goes down.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
backup peer
21