Table of Contents
Advertisement
show ethernet lmi
--- ------------------------------------------------------------ --------------
A
EVC_MP2MP_101
A
EVC_P2P_110
Key: St=Status, A=Active, P=Partially Active, I=Inactive, ?=Link Down
The following sample output is generated from the show ethernet lmi command using the evc and
optional detail keywords:
Router# show ethernet lmi evc detail EVC_MP2MP_101
EVC Id: EVC_MP2MP_101
interface Ethernet0/0
Time since Last Full Report: 00:25:25
Ether LMI Link Status: Up
UNI Status: Up
UNI Id: router3-e0/0+router-e0/0
CE-VLAN/EVC Map Type: Bundling
VLAN: 101
EVC Status: Active
EVC Type: Multipoint-to-Multipoint
Remote UNI Count: Configured = 2, Active = 2
UNI Id
------
router4-e0/0+router1-e0/0
router5-e0/0+router6-e0/0
Table 28
evc and detail keywords.
Table 28
Field
EVC Id
Time since Last Full Report
Ether LMI Link Status
UNI Status
UNI Id
CE-VLAN/EVC Map Type
VLAN
EVC Status
EVC Type
Remote UNI Count
Port
The following sample output is generated from the show ethernet lmi command using the map
interface keyword:
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
516
describes the significant fields shown in output of the show ethernet lmi command using the
show ethernet lmi evc detail Field Descriptions
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
UNI Status
Port
----------
----
Up
Remote
Up
Remote
Description
Identifier of the EVC.
Number of hours, minutes, seconds since the CE requested a
detailed report.
Operational state of the LMI link.
Operational state of the UNI.
Identifier of the UNI between the CE and PE devices.
EVC map type: bundling, multiplex, or all-to-one
Identifier of the VLAN.
Operational state of the EVC.
Type of connection (point-to-point or
multipoint-to-multipoint).
Number of remote UNIs that are configured and the number
that are operational.
Type of port, either local or remote, on which the EVC is
configured. If the port is local, the interface ID is specified.
Gi0/1
Gi0/1
OL-23890-01
Advertisement
Table of Contents
