Table of Contents
Advertisement
priority
Related Commands
Command
bandwidth
ip rtp priority
ip rtp reserve
max-reserved-bandwidth
show interfaces fair-queue
show policy-map
show policy-map interface
show queue
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
322
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Specifies or modifies the bandwidth allocated for a class belonging
to a policy map.
Reserves a strict priority queue for a set of RTP packet flows
belonging to a range of UDP destination ports.
Reserves a special queue for a set of RTP packet flows belonging to
a range of UDP destination ports.
Changes the percent of interface bandwidth allocated for CBWFQ,
LLQ, and IP RTP Priority.
Displays information and statistics about WFQ for a VIP-based
interface.
Displays the configuration of all classes for a specified service policy
map or all classes for all existing policy maps.
Displays the packet statistics of all classes that are configured for all
service policies either on the specified interface or subinterface or on
a specific PVC on the interface.
Displays the contents of packets inside a queue for a particular
interface or VC.
OL-23890-01
Advertisement
Table of Contents
