Shape Max-Buffers - Cisco MWR 2941 Command Reference Manual

shape max-buffers

shape max-buffers
To specify the number of buffers allowed on shaping queues, use the shape max-buffers command in
class-map configuration mode. To set the number of buffers to its default value, use the no form of this
command.
Syntax Description number-of-buffers
Command Default 1000 buffers are preset.
Command Modes Class-map configuration (config-cmap)
Command History Release
12.1(2)T
12.2(33)SRA
12.2SX
12.4(20)T
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
You can specify the maximum number of buffers allowed on shaping queues for each class configured
to use Generic Traffic Shaping (GTS).
You configure this command under a class in a policy map. However, the shape max-buffers command
is not supported for HQF in Cisco IOS Release 12.4(20)T. Use the queue-limit command, which
provides similar functionality.
Examples The following example configures shaping and sets the maximum buffer limit to 100:
shape average 350000
shape max-buffers 100
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
448
shape max-buffers number-of-buffers
no shape max-buffers
Specifies the number of buffers. The minimum number of buffers is 1; the
maximum number of buffers is 4096.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
This command was integrated into Cisco IOS Release 12.4(20)T, but
without support for hierarchical queueing framework (HQF). See the
"Usage Guidelines" for additional information.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01