Cisco MWR 2941 Command Reference Manual page 414

service-policy
Examples
The following example shows how to attach a policy map to a Gigabit Ethernet interface:
Router# configure terminal
Router(config)# interface gigabitethernet 0/2
Router(config-if)# service-policy input pmap1
The following example attaches the service policy map named "policy9" to the output PVC named
"cisco":
Router# configure terminal
Router(config)# pvc cisco 0/5
Router(config-if-atm-vc)# service-policy output policy9
Router(config-if-atm-vc)# vbr-nt 400 200 500
Related Commands Command
class-map
policy-map
show policy-map
show policy-map
interface
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
396
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Accesses the QoS class map configuration mode to configure QoS class
maps.
Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
Displays the configuration of all classes for a specified service policy map
or all classes for all existing policy maps.
Displays the configuration of all classes configured for all service policies
on the specified interface or displays the classes for the service policy for a
specific PVC on the interface.
OL-23890-01