Table of Contents
Advertisement
set precedence
Related Commands
Command
match dscp
match precedence
match protocol
policy-map
service-policy
set cos
set dscp
set qos-group
show policy-map
show policy-map
interface
show table-map
table-map (value
mapping)
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
436
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Identifies a specific IP DSCP value as a match criterion.
Identifies IP precedence values as match criteria.
Configures the match criteria for a class map on the basis of the specified
protocol.
Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
Attaches a policy map to an input interface or VC, or an output interface
or VC, to be used as the service policy for that interface or VC.
Sets the Layer 2 CoS value of an outgoing packet.
Marks a packet by setting the Layer 3 DSCP value in the ToS byte.
Sets a group ID that can be used later to classify packets.
Displays the configuration of all classes for a specified service policy map
or all classes for all existing policy maps.
Displays the configuration for all classes configured for all service
policies on the specified interface or displays the classes for the service
policy for a specific PVC on the interface.
Displays the configuration of a specified table map or all table maps.
Creates and configures a mapping table for mapping and converting one
packet-marking value to another.
OL-23890-01
Advertisement
Table of Contents
