Show Ethernet Oam Summary - Cisco MWR 2941 Command Reference Manual

show ethernet oam summary

show ethernet oam summary
To display active Ethernet operations, maintenance, and administration (OAM) sessions on a device, use
the show ethernet oam summary command in privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History Release
12.2(33)SRA
12.4(15)T
12.2(33)SXH
12.2(33)MRA
15.0(1)MR
Examples
The following example shows output from a show ethernet oam summary command:
Router# show ethernet oam summary
Symbols:
Capability codes: L - Link Monitor,
Local
Interface
Fa3/1
Gi6/11
Table 36
Table 36
Field
Local Interface
MAC Address
Remote Vendor
Mode
Capability
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
530
show ethernet oam summary
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
* - Master Loopback State,
U - Unidirection,
MAC Address
0080.09ff.e4a0 00000C active
0030.96fd.6bfa 00000C active
describes the significant fields shown in the display.
show ethernet oam summary Field Descriptions
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
# - Slave Loopback State
R - Remote Loopback
V - Variable Retrieval
Remote
Vendor Mode Capability
L R
L R
Description
Type of local interface
MAC address of the local interface
The vendor for the remote device.
Operational state of the local interface
Functions the local interface can perform
OL-23890-01