Cisco MWR 2941 Command Reference Manual page 88

cns config partial
<wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/04/secext"
SOAP:mustUnderstand="true">
<wsse:UsernameToken>
<wsse:Username>user1</wsse:Username>
<wsse:Password>password1</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
<CNS:cnsHeader Version="2.0" xmlns:CNS="http://www.cisco.com/management/cns/envelope">
<CNS:Agent>CNS_CONFIG</CNS:Agent>
<CNS:Response>
<CNS:correlationID>SOAP_IDENTIFIER</CNS:correlationID>
</CNS:Response>
<CNS:Time>2005-09-13T08:34:36.523Z</CNS:Time>
</CNS:cnsHeader>
</SOAP:Header>
<SOAP:Body xmlns="http://www.cisco.com/management/cns/config">
<configResults version="2.0" overall="Success">
<configId>AAA</configId>
</configResults>
</SOAP:Body>
</SOAP:Envelope>
Related Commands Command
cns config initial
cns event
cns trusted-server
show cns config
outstanding
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
70
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Starts the CNS configuration agent and initiates an initial configuration.
Enables and configures CNS event agent services.
Specifies a trusted server for CNS agents.
Displays information about incremental CNS configurations that have
started but are not yet completed.
OL-23890-01