Table of Contents
Advertisement
show ethernet cfm maintenance-points remote detail
show ethernet cfm maintenance-points remote detail
To display information about a remote maintenance point in the continuity check database, use the show
ethernet cfm maintenance-points remote detail command in privileged EXEC mode.
CFM IEEE 802.1ag Standard (CFM IEEE)
Syntax Description
mac
mac-address
mpid
id
domain
domain-name
port
vlan
vlan-id
Command Default
When no options are specified, all remote maintenance endpoints (MEPs) matching the specified MAC
address or maintenance point ID (MPID) are displayed.
Command Modes
Privileged EXEC (#)
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
504
show ethernet cfm maintenance-points remote detail {mac mac-address | mpid id} [domain
domain-name [port | vlan vlan-id]]
Shows a remote MAC address.
MAC address of the remote maintenance point, in the format
abcd.abcd.abcd.
Shows a remote maintenance point.
Integer from 0 to 8191 that identifies the maintenance point.
(Optional) Shows a specific maintenance domain.
(Optional) String of a maximum of 154 characters.
(Optional) Shows the operational state of the port MEP.
(Optional) Shows a VLAN configuration.
(Optional) Integer from 1 to 4094 that identifies the VLAN.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Advertisement
Table of Contents
