Cisco MWR 2941 Command Reference Manual page 47

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cbr
To configure the constant bit rate (CBR) for the ATM circuit emulation service (CES) for an ATM
permanent virtual circuit (PVC), use the cbr command in the appropriate configuration mode. To restore
the default, use the no form of this command.
Syntax Description rate
Command Default The CBR is not configured.
Command Modes Interface-ATM-VC configuration (for ATM PVCs and SVCs)
PVC range configuration (for an ATM PVC range)
PVC-in-range configuration (for an individual PVC within a PVC range)
ATM PVP configuration
Command History Release
12.0
12.1(5)T
12.2(5)
12.2(7)
12.2(33)SRA
12.2SX
Cisco IOS XE Release
2.3
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Examples
The following example configures the constant bit rate on ATM PVC 20:
pvc 20
cbr 56
OL-23890-01
cbr rate
no cbr rate
Constant bit rate (also known as the average cell rate) for ATM CES. Valid
values are 32–1920 kbps.
Modification
This command was introduced for the ATM CES on the Cisco MC3810.
This command was made available in PVC range and PVC-in-range
configuration modes.
Support was added for the PA-A3 port adapter on the Cisco 7200 series
routers.
Support was added for the PA-A3 port adapter on the Cisco 7500 series
routers.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
This command was made available in ATM PVP configuration mode.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cbr
29