Table of Contents
Advertisement
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Release
12.4(2)T
12.4(4)T
12.2(28)SB
12.2(31)SB2
12.3(7)XI2
12.2(18)ZY
12.2(33)SRC
12.2(33)SB
Cisco IOS XE
Release 2.3
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
Choose the command mode according to the intended use of the command, as follows:
Application
Standalone VC
ATM VC bundle members
A range of ATM PVCs
Individual PVC within a PVC range
Frame Relay VC
You can attach a single policy map to one or more interfaces or to one or more VCs to specify the service
policy for those interfaces or VCs.
A service policy specifies class-based weighted fair queueing (CBWFQ). The class policies that make
up the policy map are then applied to packets that satisfy the class map match criteria for the class.
To successfully attach a policy map to an interface or ATM VC, the aggregate of the configured
minimum bandwidths of the classes that make up the policy map must be less than or equal to 75 percent
of the interface bandwidth or the bandwidth allocated to the VC.
OL-23890-01
Modification
This command was modified to support PVC range subinterface
configuration mode and i PVC-in-range configuration mode to extend policy
map functionality on an ATM VC to the ATM VC range.
The type stack and the type control keywords were added to support
flexible packet matching (FPM).
This command was integrated into Cisco IOS Release 12.2(28)SB and
implemented on the Cisco 10000 series router.
This command was integrated into Cisco IOS Release 12.2(31)SB2.
This command was modified to support PVC range configuration mode and
PVC-in-range configuration mode for ATM VCs on the Cisco 10000 series
router and the Cisco 7200 series router.
The type stack and the type control keywords were integrated into
Cisco IOS Release 12.2(18)ZY on the Catalyst 6500 series of switches
equipped with the Programmable Intelligent Services Accelerator (PISA).
Support for this command was enhanced on Cisco 7600 series routers.
This command's behavior was modified and implemented on the
Cisco 10000 series router for the PRE3 and PRE4.
This command was modified to support ATM PVP configuration mode.
This command was integrated into Cisco IOS Release 12.4(20)MR. This
release does not support the type access-control parameter.
This command was integrated into Cisco IOS Release 12.2(33)MRA. This
release does not support the type access-control parameter.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Mode
VC submode
Bundle-VC configuration
PVC range subinterface configuration
PVC-in-range configuration
Map-class configuration
service-policy
395
Advertisement
Table of Contents
