Show Controllers Backplane Ethernet Local Detail - Cisco ASR 9000 Series Manual

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local detail

To display detailed information for the Ethernet interface that connects the node to the router control Ethernet,
use the show controllers backplane ethernet local detail command in EXEC mode.
show controllers backplane ethernet local detail
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local detail command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local detail
FastEthernet0_33_1 is up
Hardware is 10/100 Ethernet, H/W address is 5246.4800.0211
Internet address is 10.0.2.17
MTU 1514 bytes
Encapsulation HFRIES (HFR Internal Ethernet Server)
Mode : Full Duplex,
Table 3: show controllers backplane ethernet local detail Field Descriptions
Field
Hardware
Internet address
MTU
OL-24762-01
Rate : 100Mb/s
787486 packets input, 64535218 bytes, 0 total input drops
0 packets discarded (0 bytes) in garbage collection
3 packets discarded (582 bytes) in recv processing
Received 8 broadcast packets, 285994 multicast packets
Input errors: 0 CRC, 0 overrun, 0 alignment, 0 length, 0 collision
682244 packets output, 157245225 bytes, 0 total output drops
Output 42649 broadcast packets, 42649 multicast packets
Output errors: 0 underruns, 0 aborts, 0 loss of carrier
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
show controllers backplane ethernet local detail
Modification
This command was introduced.
Description
Provides the hardware type, followed by the hardware
address.
IP address of the interface.
Maximum packet size, in bytes, that a particular
interface can handle.
7