Table of Contents
Advertisement
Wireless-B Broadband Router
Chapter 4: Connecting the Wireless-B Broadband Router
Hardware Installation
1. Locate an optimum location for the Broadband Router. The best place for the Broadband Router is usually at
the center of your wireless network, with line of sight to all of your mobile stations.
2. Fix the direction of the antenna. Try to place it in a position that will best cover your wireless network.
Normally, the higher you place the antenna, the better the performance will be. The antenna's position
enhances the receiving sensitivity.
3. Connect a standard Ethernet network cable to the Broadband Router's Internet port. Then, connect the
other end of the Ethernet cable to your Cable or DSL Broadband modem. (See Figure 4-1.)
4. Connect your network PCs or Ethernet devices to one of the Broadband Router's numbered ports with a
standard Ethernet network cable. (See Figure 4-2.)
IMPORTANT: Make sure to use the power adapter
that is supplied with the Router. Use of a different
power adapter could damage the Router.
5. Connect the AC Power Adapter to the Broadband Router's Power Socket and the other end into an electrical
outlet. Only use the power adapter supplied with the Broadband Router. Use of a different adapter may result
in product damage. (See Figure 4-3.)
Now that the Router is connected, proceed to Chapter 5: Configuring the Wireless-B Broadband Router, for
directions on how to set up and configure the Router.
Chapter 4: Connecting the Wireless-B Broadband Router
Hardware Installation
Figure 4-1: Connecting Your Internet Connection
Figure 4-2: Connecting Your Network Devices
Figure 4-3: Connecting the Power
8
Advertisement
Table of Contents
