L2Transport Cell-Packing - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

l2transport cell-packing

To configure L2VPN cell packing parameters, use the l2transport cell-packing command in interface
configuration mode. To return to the default behavior, use the no form of this command.
l2transport cell-packing maximum timer
no l2transport cell-packing maximum timer
Syntax Description
maximum
timer
Command Default
No default behavior or values
Command Modes
Interface configuration
Command History
Release
Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
atm
Examples The following example shows how to configure L2VPN cell packing parameters:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# interface GigabitEthernet 0/0/0/0
RP/0/0/CPU0:router(config-if)# l2transport cell-packing 33 2
OL-28460-01
Maximum number of cells to be packed in a packet. Range is 2 to 86.
Cell packing timer (1, 2, or 3).
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Modification
This command was introduced.
Operations
read, write
read, write
l2transport cell-packing
45