Police Rate - Cisco NCS 540 Series Routers Command Reference Manual

Modular qos command reference
Hide thumbs Also See for NCS 540 Series Routers:
Table of Contents

Advertisement

Congestion Management Commands

police rate

To configure traffic policing and enter policy map police configuration mode, use the police rate command
in policy map class configuration mode. To remove traffic policing from the configuration, use the no form
of this command.
police rate {value [units]|percent percentage}[burst burst-size [burst-units]] [peak-rate {value
[units]|percent percentage}] [peak-burst peak-burst [burst-units]]
no police rate {value [units]|percent percentage}[burst burst-size [burst-units]] [peak-rate {value
[units]|percent percentage}] [peak-burst peak-burst [burst-units]]
Syntax Description
value
units
percent percentage
burst burst-size
burst-units
peak-rate value
peak-burst peak-burst
No restrictions on the flow of data are applied to any interface.
Command Default
Policy map class configuration
Command Modes
Committed information rate (CIR). Range is from 1 to 4294967295.
(Optional) Unit of measurement for the CIR. Values can be:
• bps —bits per second (default)
• gbps —gigabits per second
• kbps —kilobits per second
• mbps —megabits per second
Specifies the police rate as a percentage of the CIR. Range is from 1 to 100. See
the Usage Guidelines for information on how to use this keyword.
(Optional) Specifies the burst size in the specified burst-units . The default burst
value is 10 milliseconds of the CIR. The maximum burst value allowed is 4194304
bytes.
(Optional) Unit of measurement for the burst values. Values can be:
• bytes —bytes (default)
• gbytes —gigabytes
• kbytes —kilobytes
• mbytes —megabytes
• ms —milliseconds
• us —microseconds
• packets —packets
(Optional) Specifies the Peak Information Rate (PIR) in the specified units.
(Optional) Specifies the peak burst size in the specified burst-units. The default
peak burst value is 10 milliseconds of the PIR. The maximum peak-burst value
allowed is 8388608 bytes. Also, the difference of the peak-burst value and burst
value cannot be larger than 4194304 bytes.
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers

police rate

43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ncs 5500 series

Table of Contents