Installing The Chassis In A Two-Post Rack - Cisco ASR 9901 Hardware Installation Manual

Unpacking and Installing the Chassis
• Level (optional)
• One of the following rack-mounting kits (provided by Cisco):

Installing the Chassis in a Two-Post Rack

To install the chassis in a two-post rack, follow these steps:
Before you begin
Before you install the chassis in the rack, make sure that you have the necessary tools and equipment (see
Before you Begin, on page
Procedure
Step 1
Attach the mounting brackets to the sides of the chassis using twelve M4 flat-head screws per side. The
recommended maximum torque is 15 in.-lb (1.7 N-m).
Step 2
Attach the left and right slide rail assemblies to the back of the 2-post rack using four M5 pan head screws
per side. The recommended maximum torque is 31 in.-lb (3.5 N-m).
• Cisco PID ASR-9901-2P-KIT for mounting the chassis in a 19-inch or 23-inch two-post rack.
• Cisco PID ASR-9901-4P-KIT for mounting the chassis in a 19-inch or 23-inch four-post rack.
48).
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
Installing the Chassis in a Two-Post Rack
49