3Com V7122 User Manual page 381

The following procedure assumes that there is at least one configured read-write community,
are currently one or more Trusted Managers, and the TransportTag for columns for all rows
in the snmpCommunityTable are currently set to MGR. This procedure must be done from
one of the existing Trusted Managers.
To add a subsequent Trusted Manager:
Add a row to the snmpTargetAddrTable with these values:
1
Name=mgrN
TagList=MGR
Params=v2cparams
Where N is an unused number between 0 and 4.
Add a row to the snmpTargetAddrExtTable table with these values:
2
Name=mgrN
snmpTargetAddrTMask=255.255.255.255:0
An alternative to the above procedure is to set the snmpTargetAddrTMask column while you
are creating other rows in the table.
The procedure below assumes that there is at least one configured read-write community,
are currently two or more Trusted Managers, and the taglist for columns for all rows in the
snmpCommunityTable are currently set to MGR. This procedure must be done from one of
the existing trusted managers, but not the one that is being deleted.
To delete a Trusted Manager (not the final one) :
Remove the appropriate row from the snmpTargetAddrTable.
The change takes affect immediately. The deleted trusted manager cannot access the
board. The agent automatically removes the row in the snmpTargetAddrExtTable.
The procedure below assumes that there is at least one configured read-write community,
currently only one Trusted Manager, and the taglist for columns for all rows in the
snmpCommunityTable are currently set to MGR. This procedure must be done from the final
Trusted Manager
To delete the final Trusted Manager:
Set the value of the TransportTag field on each row in the snmpCommunityTable to the
1
empty string.
Remove the appropriate row from the snmpTargetAddrTable.
2
The change takes affect immediately. All managers can now access the board. The agent
automatically removes the row in the snmpTargetAddrExtTable.
V7122 Gateway User Guide
381