3Com V7122 User Manual page 102

NFS is utilized by the gateway to load the cmp, ini and configuration files using the Automatic
Update mechanism (see
An NFS file server can share multiple file systems. There must be a separate row
for each remote file system shared by the NFS file server that needs to be
accessed by the gateway.
To configure the NFS Settings parameters:
Open the 'Application Settings' screen (Advanced Configuration menu > Network
1
Settings > Application Settings option); the 'Application Settings' screen is displayed.
Open the NFS Table screen by clicking the arrow sign (-->) to the right of the NFS label;
2
the NFS Table screen is displayed.
NFS Settings Table Screen
Figure 39
To add a remote NFS file system, select an available line number from the Line Number
3
drop-down list.
Click the Add an Empty Line button; an empty line appears.
4
Configure the NFS Settings. The NFS parameters are described in
5
Click the Apply New Settings button; the remote NFS file system is mounted
6
immediately. Check the Syslog server for the 'NFS mount was successful' message.
To save the changes so they are available after a power fail, see
7
To avoid terminating calls in progress, a row must not be deleted or modified while
the board is currently accessing files on that remote NFS file system.
102
Automatic Update Mechanism).
Table 35.
Saving Configuration.
V7122 GatewayUser Guide