3Com V7122 User Manual page 234

ini File Field Name
Web Parameter Name
V23ModemTransportType
[V.23 Modem Transport Type]
V32ModemTransportType
[V.32 Modem Transport Type]
V34ModemTransportType
[V.34 Modem Transport Type]
BellModemTransportType
InputGain
[Input Gain]
VoiceVolume
[Voice Volume]
RTPRedundancyDepth
[RTP Redundancy Depth]
RFC2198PayloadType
234
Valid Range and Description
V.23 Modem Transport Type that the gateway uses.
You can select:
0 = Disable (Transparent)
1 = Enable Relay -- N/A
2 = Enable Bypass -- default
3 = Events Only (Transparent with Events)
V.32 Modem Transport Type that the gateway uses.
You can select:
0 = Disable (Transparent)
1 = Enable Relay -- N/A
2 = Enable Bypass -- default
3 = Events Only (Transparent with Events)
This option applies to V.32 and V.32bis modems.
V.90 / V.34 Modem Transport Type that the gateway uses.
You can select:
0 = Disable (Transparent)
1 = Enable Relay -- N/A
2 = Enable Bypass -- default
3 = Events Only (Transparent with Events)
Determines the Bell modem transport method.
0 = Transparent (default).
2 = Bypass.
3 = Transparent with events.
PCM input gain control in dB. This parameter sets the level for the
received (PSTN IP) signal.
The valid range is -32 to 31 dB.
The default value is 0 dB.
This parameter is intended for advanced users. Changing it
affects other gateway functionalities.
Voice gain control in dB. This parameter sets the level for the transmitted
(IP PSTN) signal.
The valid range is -32 to 31 dB.
The default value is 0 dB.
0 = Disable redundancy packets generation (default)
1 = Enable generation of RFC 2198 redundancy packets.
RTP redundancy packet payload type, according to RFC 2198.
The range is 96-127. The default is 104.
Applicable if 'RTPRedundancyDepth=1'
V7122 GatewayUser Guide