3Com V7122 User Manual page 136

b) Click Reset; the gateway resets, utilizing the new cmp and ini file you loaded up to
now as well as utilizing the other configuration files.
c) Click Back; the 'Load a cmp file' screen is reverted to; see
d) Click Next; the 'Load a CPT File' screen opens; Loading a new CPT file or any other
auxiliary file listed in the Wizard is optional.
Load a CPT File Screen
Figure 69
Follow the same procedure you followed when loading the ini file (see
8
procedure applies to the 'Load a coefficient file' screen.
In the 'Finish' screen (see
9
process by clicking Reset or Cancel.
a) Click Reset, the gateway 'burns' the newly loaded files to flash memory. The
'Burning files to flash memory' screen appears. Wait for the 'burn' to finish. When it
finishes, the 'End Process' screen appears displaying the burned configuration files (see
Figure 71).
b) Click Cancel, the gateway resets, utilizing the files previously stored in flash
memory. (Note that these are NOT the files you loaded in the previous Wizard steps).
136
Figure 70), the Next button is disabled. Complete the upgrade
Figure 66.
Step 6). The same
V7122 GatewayUser Guide