Ss7 Parameter - 3Com V7122 User Manual

SS7 Parameters
Table 64
ini File Parameter Name
SS7_MTP2_Param_AERM_TIE
[AERM TIE]
SS7_MTP2_Param_AERM_TIN
[AERM TIN]
SS7_MTP2_Param_Error_Correction
_Method
[Error Correction Method]
SS7_MTP2_Param_IAC_CP
[IAC CP]
SS7_MTP2_Param_Link_Rate
[Link Rate]
SS7_MTP2_Param_LSSU_Length
[LSSU Length]
SS7_MTP2_Param_Octet_Counting
[Octet Conting]
SS7_MTP2_Param_SUERM_SU_D
[SUERM SU D]
SS7_MTP2_Param_SUERM_T
[SUERM T]
SS7_MTP2_Param_Timer_T1
[T1]
SS7_MTP2_Param_Timer_T2
[T2]
322
Description
Defines the SS7 alignment emergency error rate threshold.
The valid range is 0 to 10.
The default value is 1.
Defines the SS7 alignment normal error rate threshold.
The valid range is 0 to 20.
The default value is 4.
Defines the SLI error correction method.
0 = Basic (default)
B = Basic
P = PCR (Preventive Cyclic Retransmission)
Defines the number of aborted proving attempts before sending
an out-of-service to MTP-3.
The valid range is 0 to 10.
The default value is 5.
Defines the SS7 SLI Link Rate.
Choose either:
0 = 64 kbps (default)
A = 64 kbps
D = 56 kbps
Defines the SS7 MTP2 LSSU length as 1 or 2 (bytes).
The valid range is 1 to 2.
The default value is 1.
Defines the SS7 MTP2 Octet received while the OCTET is in
counting mode (# of Octets received - N Octets - while in Octet
counting mode).
The valid range is 0 to 256.
The default value is 16.
Defines the SS7 Signal Unit error rate monitor D threshold.
The valid range is 0 to 256.
The default value is 256.
Defines the SS7 SUERM (Signal Unit Error Rate Monitor) T
threshold.
The valid range is 0 to 256.
The default value is 64.
Defines the SS7 MTP2 T1 alignment ready timer (in msecs).
The valid range is 0 to 100000.
The default value is 50000.
Defines the SS7 MTP2 T2 unaligned timer (in msecs).
The valid range is 0 to 200000.
The default value is 150000.
V7122 GatewayUser Guide