3Com V7122 User Manual page 97

IP Profile Settings Screen
Figure 36
In the 'Profile ID' drop-down list, select the IP Profile you want to edit (up to four IP
2
Profiles can be configured).
In the 'Profile Preference' drop-down list, select the preference (1-10) of the current
3
Profile. The preference option is used to determine the priority of the Profile. Where '20'
is the highest preference value. If both IP and Tel profiles apply to the same call, the
coders and other common parameters (noted by an asterisk in the description of the
parameter lPProfile_ID) of the preferred Profile are applied to that call. If the Preference
of the Tel and IP Profiles is identical, the Tel Profile parameters are applied.
If the coder lists of both IP and Tel Profiles apply to the same call, an
intersection of the coders is performed (that is, only common coders remain).
The order of the coders is determined by the preference.
Configure the Profile's parameters according to your requirements. For detailed
4
information on each parameter see the description of the screen in which it is configured
as an individual parameter.
V7122 Gateway User Guide
97